Skip to main content

Using HDSDR with HF Transceiver (Modified - Add Videos) (Examples of using RTL-SDR in uBITX #2) - CEC Firmware working Information

Using HDSDR with HF Transceiver 
(Examples of using RTL-SDR in uBITX #2)
Modified - Add Videos

CAT Support uBITX Firmware CEC Version supports SDR connections from Version 1.07.
http://www.hamskey.com/2018/04/how-to-connect-sdr-rtl-sdr-to-ubitx-and.html


uBITX CEC Firmware is working to release beta 1.073 soon.
1.Supports 16x02 LCD, I2C 16x02 LCD, 20x04 LCD and I2C 20x04 LCD.

2.Extended Button support. 
With only 4 resistors and 4 buttons, you can directly control the frequently used 'Select Mode', 'Band up', 'Band down' and 'Select Tune Step'.

3.I decided to support Signal Meter. 
To support all forms of S.Meter, curve values (Level value)can be entered directly from uBITX Manager.  



The video below is the video I shot at the time of this writing.

Tested video that was run after all the settings for uBITX and HDSDR are complete


1.Install
  http://www.hdsdr.de/
  HDSDR is a representative SDR software supporting IF-output.

  Download & Install


Download ExtIO-RTL2832.dll and copy to HDSDR Installed folder
(if you use RTL-SDR)
If you search for 'ExtIO_RTL2832.dll' on Google, you can find a site that can be downloaded.


2.Configuration HDSDR
Execute HDSDR

Set Transceiver (Omni-Rig)
To download and install the Omni-rig, see the link below.

Click the 'CAT to Radio (Omni-Rig) -> Omni-Rig Setup'

If you have already set up Omni-Rig, it will run automatically.


Option -> RF Front-End Configuration

Select SDR on IF output, which is controlled 'by Omni-Rig1'

Enter IF-Frequency, Enter the SDR Offset Frequency you entered in uBITX Manager.
Below is an example of the settings of my uBITX Manager.


Click the 'Apply'

3.QSO with HDSDR
  Turn SDR Mode
  (Depending on your radio, you can skip this part. This example is an example from uBITX. )
The example below is an example of a 20x04 LCD. In the case of 16x02 LCD, it appears slightly different.

Example of uBITX with 20x04 LCD




Example of uBITX with 20x04 LCD
















Comments

  1. What is 14.017 ? I wondered from before.

    ReplyDelete
    Replies
    1. other The VFO frequency.
      uBITX shows the frequency of VfoB up to Khz when VfoA is main.
      If vfoB, it shows the frequency of vfoA.
      If you check the Scroll option in uBITX Manager, it scrolls the whole frequency periodically to the left.
      Ian KD8CEC

      Delete

Post a Comment

Popular posts from this blog

Release CEC Firmware v1.200 for uBITX All version(include V2, V3, V4, V5)

Release CEC Firmware v1.200 for uBITX All Version (include v2, v3, v4, v5) I did the firmware work for v5 when uBITX V5 was released, but I release it now. I received the feedback from a thankful beta tester and tested it myself by converting my uBITX v3 to v5 but I was not sure. I ordered the uBITX V5 and delivered the correct uBITX V5, so I made a little more fine-tuning. If you use V2, V3, V4, you do not need to update this firmware.

uBITX with Nextion LCD (CEC Firmware) - Installation and Introduction

uBITX with Nextion LCD (CEC Firmware) -  Installation and Introduction uBITX CEC Firmware supports various LCD since Version 1.08 (16x02 Parallel, 20x04 Parallel, 16x02  I2C, 20x04 I2C, 16x02 Dual LCD with I2C). Supports Nextion LCD (Graphic LCD) from Version 1.09, Version 1.09x is primarily aimed at Nextion LCD support. Also 1.09x will continue to be Beta version. If you want a stable version, please use 1.08 or 1.1 version to be released in the future.

Release EU1KY AA Firmware CEC Version 1.01 and 1.0a

Release EU1KY AA Firmware CEC Version 1.01 and 1.0a It is the stabilized final version of EU1KY AA. Updates starting with Version 0.1 continue to add features. Please refer to the link below for added features. I have separated the Version to 1.01 and 1.0A for users who want to use AA only for instrumentation purposes. *  If you want to use all the features added up to Version 0.71, please use Version 1.0A. *  If you want to use it only for instrument use, please use Version 1.01 Version V1.0A Version V1.01 1.Download Firmware Version 1.01 and 1.0a https://github.com/phdlee/antennaanalyzer/releases Version 1.01 (Version with only antenna analyzer function) https://github.com/phdlee/antennaanalyzer/releases/download/v1.01/AA_CEC_V1.01.zip Version 1.0A (Version with all features added up to Version 0.71) https://github.com/phdlee/antennaanalyzer/releases/download/v1.01/AA_CEC_V1.0A.zip ConvertRXP (Converters for using AA measurement data in other tool