KD8CEC Amateur Radio

 Introduction to UV-K5 HF 0.5 (Fullband receive version) This is an introduction to UV-K5 HF full-band reception firmware 0.4HF using SI4732-A10. This version is released separately from the existing UV-K5 CEC firmware version. because space is needed to store a large PATCH file to use SI4732-A10's SSB. This article only describes the features newly added in Version 0.5. Please check the links below for full features. How to modify your hardware http://www.hamskey.com/2024/02/uv-k5s-hf-full-band-reception-lsb-usb.html Version 0.3HF (Most feature descriptions are provided) http://www.hamskey.com/2024/02/introduction-to-uv-k5-hf-fullband.html Version 0.41HF (Description of Band plan function and Dual RX function) http://www.hamskey.com/2024/03/introduction-to-uv-k5-hf-fullband.html

  C-BOARD for UV-K5 I created an externally mountable DSP-Board to process digital signals from UV-K5. DSP-Board was named C-Board. C-Board is divided into versions ranging from the simplest version to one that can be equipped with GPS.

 Introducing UV-K5 Version 0.3C (Added WSPR , APRS TX with PC ) Version 0.3C includes tasks associated with computers. You can use the same cable you used to update the firmware. If you just want to receive APRS you will need some modifications. This modification can also be used for FT8 communication that will be supported in the future.

  Introduction to UV-K5 HF Fullband receive Version 0.41 (Changed from 0.40) This is an introduction to UV-K5 HF full-band reception firmware 0.4HF using SI4732-A10. This version is released separately from the existing UV-K5 CEC firmware version. because space is needed to store a large PATCH file to use SI4732-A10's SSB. 0.4HF added several functions to use SSB for shortwave radio and amateur radio.

 Introducing UV-K5 Version 0.2V (Spectrum & Waterfall added) The goal of this version was to secure memory to create Version 0.3 Deleted the existing FM radio program and created a lighter, more independent FM radio program. And added a simple spectrum function.

Introduction to UV-K5 HF Fullband receive Version 0.3 This is an introduction to UV-K5 HF full-band reception firmware 0.3HF using SI4732-A10. This version is released separately from the existing UV-K5 CEC firmware version. because space is needed to store a large PATCH file to use SI4732-A10's SSB. 0.3HF added several functions to use SSB for shortwave radio and amateur radio.

 Introducing UV-K5 Version 0.2P (APRS added)  (stable version) This version is a stable version with various features added to APRS test version 0.2B.  Please refer to the Version 0.2B(C) post for frequency settings and MySSID settings used in APRS. http://www.hamskey.com/2024/02/introducing-uv-k5-version-02b-aprs.html

UV-K5’s HF full-band reception (LSB, USB) circuit (confirmed version) After releasing the full band reception firmware of UV-K5 using SI4732-A10, various experiments were conducted. This post shows the experiment results and the final circuit diagram.

 Introducing UV-K5 Version 0.2C (APRS) This version is a test version. If there are no major problems, the version number will be changed to 0.2P and released again in one week. If you want a stable version, please download it after one week.

 About UV-K5 CEC Firmware Version 0.1X (from v0.1p) 1.About Version 0.1X This version is the stable version of UV-K5 Version 0.1P In Version 0.1P, many things were changed, including the internal variable structure, and we received feedback for about 8 days to check if there were any problems. The original plan was to just change the name from Version 0.1P to Version 0.1X, but several features were added as follows. Please read Version 0.1P for main features 2.SSB Filter (bandwidth)   The filter can select one of these : VFO, 3K, 2K, 1.7K, 3K+, 2K+,1.7K+     This filter operates only in SSB mode and is disabled in existing FM mode.  If you select a filter with +, the + mode is also applied to CW mode   VFO : Previous firmware state. It is selected among WIDE/NARROW selected in VFO  3K ~ 1.7K : When actually measured, it is a little wider than stated. 3K+ ~ 1.7K+ : It improves the functionality of the existing filter. Based on SINAD, there is an improvement effect of about 1dB. 3.SSTV 

 Modification of SI4732-A10 for full HF band reception on UV-K5 I will guide you on applying SI4732-A10, which is mainly used in shortwave radios that support SSB, to UV-K5.   Firmware Version CEC_0.1HF

  Introducing UV-K5 Version 0.1P (CW Mode) CW-related functions have been added to version 0.1P. The spectrum function has been removed but is maintained in the source code. Later, when the source code is distributed, you can activate it and use it if necessary. This version is for testing purposes only. It will be redistributed as the stable version 0.2 in approximately 1-2 weeks. If you don't want to beta test, you can wait a week or two and download 0.2

 Introducing UV-K5 Version 0.1M (SSTV, Text Configuration) In version 0.1M, items related to text settings and SSTV transmission function were added. As previously announced, only compiled binaries will be released from 0.1M until 1.0 is released.When the version is upgraded to 1.0, we will organize the source code and release it together. It probably won't take long.

Two features were added in V0.1c From the next version, versions with experimental elements will be published. The source code for this version has been released together. Versions 0.3 to 0.9 are in the development stage, and I will release the source code together with version 1.0

UV-K5 firmware development begins And Release 0.1b  I had a vacation last week. I was allowed about three months. The past few weeks have been a variety of experiments to develop the firmware. I start my work based on egzummer's firmware, which is the one most people use.