KD8CEC Amateur Radio

How to use Voice Keyer in EU1KY with CEC Firmware V0.7 Version 0.7 is being prepared for deployment. Voice Keyer (or Voice Recorder) function was added in Version 0.7. If you only want to use it as a voice recorder, you do not need any modifications, Just need update the firmware. If you want to use it as a Voice Keyer, you need a very simple modification. 1.Modifications for use as a voice keyer 1.1 PTT Control Below is just one example. Only the part with PC817 is shown below. 1.2 MIC Input It uses a push switch to switch between microphone and AA. It is recommended to pass a small transformer between the transceiver and the AA.  Please use only one (Left or Right) because the speaker jack of AA is stereo. Recording and playback will operate in stereo. You can use either the left or the right one for you. 2.How to use Voice Keyer 2.1 Use Voice recorder Touch the 'Voice Keyer' The 'USB Host' menu has been moved to the Configuration secti...

EU1KY AA Firmware stabilization version update (V0.4) and mores about v0.4 V0.4 has been changed to the stable version without changing the version number. I and testers tested for about a week and did not have any problems, so I added V0.4 to the stable version list.

Release EU1KY AA Firmware CEC Version 0.40 ( How to using WSPR, FT8, JT65 TX Mode) This version is a development version and may be unstable, and some of the features included in this version may be removed from V1.0, Stabilized version V0.35 has been released, and stabilized version is posted separately. stabilized version :  http://www.hamskey.com/2019/03/eu1ky-antenna-analyzer-cec-stabilized.html

Use the filter and Attenuator to test the VNA(Track scope) function in Antenna Analyzer I have measured the performance of the S2 port added to the EU1KY Antenna Analyzer.  

Release Firmware CEC Version 0.1 for Antenna Analyzer(EU1KY) I would like to thank EU1KY and DH1AFK OM for making and improving this wonderful antenna analyzer. The Antenna Analyzer is already perfect enough. I just want to add a little bit. This project will continue until CEC Version 1.0.

4. Antenna Analyzer(EU1KY) - How to Setup and Calibration The setup and calibration methods are the same for most firmware, Only the menu position is different. I will use AA Firmware CEC version for convenience. (AA firmware CEC Version will be released within one week.)

Antenna Analyzer(EU1KY) - How to Firmware Update  You can easily find some Firmware for Antenna Analyzer(EU1KY) on the internet. I will also release imporved firmware soon. if you have AA (EU1KY's antenna analyzer), you cans use all the firmware. i will try to explain it in this article ( AA firmware CEC Version will be released within one week.)

This document will continue to change as we make changes or additions. If you have an antenna board, you can make your own antenna analyzer in 30 minutes. also, you can buy assembled finished products. If you have purchased a finished product, just follow the modifications below. This document was changed on March 28. In order to prevent mistakes due to different output lines for each RF board, Piezzo connection, RTC connection, Battery voltage connection. mar/26 version for developer (my developing environment) added power, rtc, piezzo, s2 port, and changed wire color for vi, vv -> left, out