Skip to main content

Release EU1KY AA Firmware CEC Version 0.53

Release EU1KY AA Firmware CEC Version 0.53 

This version is a development version and may be unstable, and some of the features included in this version may be removed from V1.0, Stabilized version V0.40 has been released, and stabilized version is posted separately.




1. Added or improved in V0.53

  Please see the link below for revisions and improvements until Version 0.40
  (Do not download the firmware from the above page. old version)
  http://www.hamskey.com/2019/03/released-eu1ky-antenna-analyzer-version.html

  Please see the link below for revisions and improvements until Version 0.34
  (Do not download the firmware from the above page. old version)
  http://www.hamskey.com/2019/03/released-eu1ky-antenna-analyzer-version.html

  Please see the link below for revisions and improvements until Version 0.21
  (Do not download the firmware from the above page. old version)
  http://www.hamskey.com/2019/03/release-firmware-cec-version-021-for.html


1.1 Audio DSP function added

This is an Audio DSP that uses a microphone attached to the STM32F746 board.


It is a function to filter the sound frequency range coming from the radio.


Band Pass Filter (50Hz, 100Hz, 150Hz)


User Filter (Variable Bandwidth)

Please refer to LInk below for how to use 'Audio DSP'
http://www.hamskey.com/2019/05/how-to-use-audio-dsp-on-antenna.html





1.2 The frequency of WSPR has been expanded.
At the request of the tester, 630M, 2190M, 4m, 2m have been added.
Please use WSPR only for added band. (630, 2190, 4, 2)
In the added band, only WSPR works normally.


In the 2m band, the Si5351 clock must be stable. I recommend using 27Mhz TCXO for wspr on 2m.
You can use any oscillator in any band except 2m.

Videos related to WSPR will be posted soon.

1.3 I have changed the GUI of 'Single Frequency' and 'Tune SWR'


Single Frequency


Tune SWR

1.4 I changed the GUI of S21-Gain to increase the size of the Auto button.


1.5 Other minor updates
  - Apply default settings to users who are new to WSPR
  - Fixed an issue where fonts would go out of range in the LCR meter.

video of brief introduction to Version 5.0.

My development board configuration values and calibration test


2. Download Firmware
https://drive.google.com/file/d/12jHjQ6NNFlgPCNg6xkl4IH6zr334eHpA/view


3. Conclusion
I would appreciate it if you test and give feedback.
If there is no problem after 1 week ~ 2 weeks test, version name will be changed to stable version.

If you want a stable version, please use the link below. 
stabilized version : http://www.hamskey.com/2019/03/eu1ky-antenna-analyzer-cec-stabilized.html

The current stable version is V0.40.

Thank you for your test.
Ian KD8CEC





Comments

  1. Hi Ian.
    another "green tail" artifact that I noticed. most likely it does not depend on the firmware version. most likely this is one of the "childhood illness" of the device that has not yet been corrected.
    https://youtu.be/nFJtwygmWY4

    ReplyDelete
  2. Where is the "green tail"? In the Smith chart? That's normal. It's not a single frequency but a sweep + -500 kHz.

    ReplyDelete
    Replies
    1. But this is a single freq. mode... or is the frequency scanned in this mode?
      Can I set a constant frequency?

      Delete
    2. Single Freq mode also scans nearby frequencies (+, - 500Khz).
      It is fixed in the program.
      This is shown in the Smith chart as well as in the small graph at the bottom left.

      Ian KD8CEC

      Delete
    3. and there is no way to make a fixed frequency in this case?

      Vit. RT6M

      Delete
    4. Vit
      Your opinion is a worthy consideration.

      Ian KD8CEC

      Delete
  3. But I have new bad news. I found a failure of the Tune SWR indication. Need to restart to restore work.
    https://youtu.be/ihIeb17_aDc

    73! RT6M (Vit)

    ReplyDelete
    Replies
    1. Thank you for your work.
      it is not bad news, but good news for me.
      Thank you for finding a bug I can not find.

      I will fixed it on the next version.

      Ian KD8CEC

      Delete
  4. I confirm this problem. No need to restart, just disconnect and connect the antenna. It is strange.

    ReplyDelete
    Replies
    1. Mirek

      Yes, Tune SWR to take action only when Changed SWR.
      I will change it , using time interval.

      Ian KD8CEC

      Delete
  5. We are pleased to announce that the stabilized version V0.40 of our online course has been released and videos will be posted soon. This is a major milestone for us, as Pay Someone To Do Course Online can now be used by anyone who wants to pay someone to do it.

    The updated version of the course offers improved user experience with new features such as interactive videos, quizzes, and assessments. It also provides a comprehensive review of the topics covered in the course and helps users master them quickly. With this new version, students can now get more value out of their money by being able to access all the material they need in one place.

    ReplyDelete
  6. This blog is what I have looking for. It helps me a lot to solve my problem. Porch Screen Repair North Port, FL

    ReplyDelete
  7. great information. Read more website :- https://www.serverlt.com/

    ReplyDelete

Post a Comment

Popular posts from this blog

Introduction to UV-K5 HF Fullband receive version 0.3

Introduction to UV-K5 HF Fullband receive Version 0.3 This is an introduction to UV-K5 HF full-band reception firmware 0.3HF using SI4732-A10. This version is released separately from the existing UV-K5 CEC firmware version. because space is needed to store a large PATCH file to use SI4732-A10's SSB. 0.3HF added several functions to use SSB for shortwave radio and amateur radio.

Release CEC Firmware v1.200 for uBITX All version(include V2, V3, V4, V5)

Release CEC Firmware v1.200 for uBITX All Version (include v2, v3, v4, v5) I did the firmware work for v5 when uBITX V5 was released, but I release it now. I received the feedback from a thankful beta tester and tested it myself by converting my uBITX v3 to v5 but I was not sure. I ordered the uBITX V5 and delivered the correct uBITX V5, so I made a little more fine-tuning. If you use V2, V3, V4, you do not need to update this firmware.

Introducing UV-K5 Version 0.1P (CW)

  Introducing UV-K5 Version 0.1P (CW Mode) CW-related functions have been added to version 0.1P. The spectrum function has been removed but is maintained in the source code. Later, when the source code is distributed, you can activate it and use it if necessary. This version is for testing purposes only. It will be redistributed as the stable version 0.2 in approximately 1-2 weeks. If you don't want to beta test, you can wait a week or two and download 0.2