EU1KY Antenna Analyzer CEC stabilized version
First of all, Thank you for using the AA CEC Version firmware. I was going to develop it at a little bit faster until it was Version 1.0. But there were quite a few users out there. Thank you so much. In addition, several excellent testers have done various tests to help stabilize the firmware.
So I decided to divide the version into two. It is a stabilized version and a tester version.
1.About the stabilized version
The stabilization version will be upgraded if the safety is verified by testers. Therefore, the improvement of the function will be a little late.
The tester version will add new features and various tests will be done by great beta testers. Again, thank you for doing various tests.
The stabilized version aims to use stable firmware rather than adding features.
This page will continue to update the release information of the stabilized version.
2.Download the latest stabilization version
Version 0.53 (04/may/2019)
RXP (Utility for AA)
* Previous version
Version 0.40 (apr/22/2019)
Version 0.35 (apr/14/2019)
3.Last Version Information
Testing on various SD-Cards, RTC, Battery Voltage Sensor Tests on interference from various other peripherals.
In some special conditions (SD-Card status-Capacity, bran, expansion of peripheral devices), the FAT information of the SD-Card has sometimes been erased. Most of the time, there was no big problem, but the computer did not recognize it. I looked at the latest version of the Fat Library, STM's HAL, and so on.
Although not accurate, I thought there was a problem with S-Ram and Fat Library compatibility on the STM32F746 board. They occurred mainly when peripheral devices such as RTC, External Sensors were attached.
This problem has been solved by manually managing memory.
More than 100,000 tests continued in various environments and all were Passed.
I would appreciate your participation in testing so far.
(The firmware must be used after formatting the memory card)
The SD-Card stress program I used will be ported to Version 0.35 and tested. I will test the stability of the firmware by using a significant amount of data on the obsolete SD-Card.
Version 0.34 (mar/27/2019)
Removed memory interference due to increased firmware size. In addition, the screen flicker has been solved.
Base version. The V0.3x version retains the features of this version.
The stabilized version has not improved greatly in V0.30, so please refer to the link below for a description of the function.
Thank you for using the firmware.