Skip to main content

Old Photo#1 - Breadboard circuit

Old Photo#1 - Breadboard circuit

As I started my blog, began to run out of Google space.

When I have free time, I am deleting the photos from Google Photos little by little.
Some of the photos that were automatically uploaded unintentionally have memories.




It was a project to analyze two-channel waveform difference.
we had to make some of the whole circuit on the breadboard.

I did not know then, but it looks so beautiful now.





Comments

Popular posts from this blog

Introduction to UV-K5 HF 0.5 (Fullband receive version)

 Introduction to UV-K5 HF 0.5 (Fullband receive version) This is an introduction to UV-K5 HF full-band reception firmware 0.4HF using SI4732-A10. This version is released separately from the existing UV-K5 CEC firmware version. because space is needed to store a large PATCH file to use SI4732-A10's SSB. This article only describes the features newly added in Version 0.5. Please check the links below for full features. How to modify your hardware http://www.hamskey.com/2024/02/uv-k5s-hf-full-band-reception-lsb-usb.html Version 0.3HF (Most feature descriptions are provided) http://www.hamskey.com/2024/02/introduction-to-uv-k5-hf-fullband.html Version 0.41HF (Description of Band plan function and Dual RX function) http://www.hamskey.com/2024/03/introduction-to-uv-k5-hf-fullband.html

Introduction to UV-K5 HF Fullband receive version 0.41 (Changed from 0.40)

  Introduction to UV-K5 HF Fullband receive Version 0.41 (Changed from 0.40) This is an introduction to UV-K5 HF full-band reception firmware 0.4HF using SI4732-A10. This version is released separately from the existing UV-K5 CEC firmware version. because space is needed to store a large PATCH file to use SI4732-A10's SSB. 0.4HF added several functions to use SSB for shortwave radio and amateur radio.

Release DVPI Version 1.03 (scirpt update)

 Release DVPI Version 1.03 There have been some changes to the DMR node recently. This version changes only those related to the recently changed DMR node. If you normally use Version 1.0 or Version 0.95, no upgrade is required. DVPi uses the USRP Client protocol.  When you install and use DVSwitch, you must read and comply with the license that appears. The user is responsible for the license for the use of DVPi.