Skip to main content

First Receive using uBITX (HF All band Transceiver kit)

A plastic plate was used so that the pattern of the substrate did not touch the metal.



I was able to connect to the car whip antenna and received only digital signals such as JT-65 and FT-8 (7.074Mhz, 14.074Mhz USB)




To compare with FT-857, I connected the same antenna to the FT-857.



I did not feel a big difference because the area and antenna was not good.
Because digital communication is possible using FT-857 in the this condition,  uBITX is also expected to be enough for digital communication.




Label:

Comments

Post a Comment

Popular posts from this blog

Introduction to UV-K5 HF 0.5 (Fullband receive version)

 Introduction to UV-K5 HF 0.5 (Fullband receive version) This is an introduction to UV-K5 HF full-band reception firmware 0.4HF using SI4732-A10. This version is released separately from the existing UV-K5 CEC firmware version. because space is needed to store a large PATCH file to use SI4732-A10's SSB. This article only describes the features newly added in Version 0.5. Please check the links below for full features. How to modify your hardware http://www.hamskey.com/2024/02/uv-k5s-hf-full-band-reception-lsb-usb.html Version 0.3HF (Most feature descriptions are provided) http://www.hamskey.com/2024/02/introduction-to-uv-k5-hf-fullband.html Version 0.41HF (Description of Band plan function and Dual RX function) http://www.hamskey.com/2024/03/introduction-to-uv-k5-hf-fullband.html
92 comments
Read more

Release DVPI Version 1.03 (scirpt update)

 Release DVPI Version 1.03 There have been some changes to the DMR node recently. This version changes only those related to the recently changed DMR node. If you normally use Version 1.0 or Version 0.95, no upgrade is required. DVPi uses the USRP Client protocol.  When you install and use DVSwitch, you must read and comply with the license that appears. The user is responsible for the license for the use of DVPi.
118 comments
Read more

How to connect SDR (RTL-SDR) to uBITX and uBITX Firmware CEC Version V1.071 (Beta) Release

How to connect SDR (RTL-SDR) to uBITX (uBITX Firmware CEC Version V1.071 Beta Release, At the end of the beta test, we will release to 1.08.) uBITX and SDR usage will be divided into several and will be posted. Some users have attempted to connect SDR to uBITX. I also supported SDR connections from uBITX since CEC Firmware 1.070 (Beta).
42 comments
Read more