Skip to main content

I am planning a project using Raspberry Pi.

I have several types of Raspberry Pi boards.

The Raspberry Pi board is probably one of the most sold boards in recent years.
Raspberry Pi boards are inexpensive and have great performance. The best thing is that you can use Linux.

The figure below is a collection of RPI V1 to V4.

 It is RPI V1


The board on the right in the photo below is a recent RPI V4.

Already, amateur radios are using a variety of Raspberry Pi boards. I am trying to make something new.

For example, network radios for amateur radio, Devices using Wsjt-x


I experimented with cheap USB sound cards for the new project. All are USB sound cards under $4.

The sound quality was all poor. However, the RPI's fast CPU will enable DSP functionality.

Below is a $2 USB sound card with a cable attached to it. All are compatible with RPI.



Below, I thought it was possible to input a 2CH microphone with a $4 USB sound card. However, it was only 1CH microphone input.


The first project using RPI is a network(DMR) transceiver for DV Switch (or Dv Link).

With an RPI and 3.5 LCD and a USB sound card, it's easy.

You can use DMR more conveniently. (Without DMR radio)

I am testing now and will post a few days later.

Thank you for reading

Ian, KD8CEC



Comments

  1. This comment has been removed by the author.

    ReplyDelete
    Replies
    1. Is it from Nextion 3.5"LCD product?
      I'd like to make arrangements in advance.

      Raspberry Pie and LCD

      I wonder what sound card is like.

      Delete
    2. This is a RPI-only LCD that is cheaper than A. (almost $9)
      https://www.aliexpress.com/item/4000812443830.html?spm=a2g0o.productlist.0.0.7ac94bdcEvzL42


      All sound cards under $10 were the same. It's just a different shape, all of which have the same performance. You may use anything.

      Delete
  2. Yes agreed there are a lot of good options for compact yet powerful cpu boards. The Pi is one and there are also lots of others that have so much more compute power than and Arduino board at the same cost. Looking forward to what you come up with.

    ReplyDelete
    Replies
    1. Thanks for the comment.

      RPI's fast CPU is the best advantage. It is also nice to be able to use Linux based experiences and libraries.

      Delete
  3. Nice Article!
    You know how to write urdu in ms word. Then visit our site https://www.ahsify.xyz/2021/09/write-urdu-in-ms-word.html and others.

    ReplyDelete
  4. Nice Information Your first-class knowledge of this great job can become a suitable foundation for these people. I did some research on the subject and found that almost everyone will agree with your blog.
    digital marketing courses in pune

    ReplyDelete
  5. I brought this Raspberry Pi. This is highly recommended aside from being inexpensive this is a nice board. Chain Link Fence Installation Amarillo, TX

    ReplyDelete
  6. Hello Ian Lee (KD8CEC) this is Luis (DW1NOL) first time I try this DVPI its verry awsome and the new version is so easy to use.thank you verry much for sharing and Im happy also to see that my call is include in your picture example hi hi..hoping to make contact with you on DMR so 73 and mabuhay..Salamat.

    ReplyDelete

Post a Comment

Popular posts from this blog

Introduction to UV-K5 HF Fullband receive version 0.3

Introduction to UV-K5 HF Fullband receive Version 0.3 This is an introduction to UV-K5 HF full-band reception firmware 0.3HF using SI4732-A10. This version is released separately from the existing UV-K5 CEC firmware version. because space is needed to store a large PATCH file to use SI4732-A10's SSB. 0.3HF added several functions to use SSB for shortwave radio and amateur radio.

Release CEC Firmware v1.200 for uBITX All version(include V2, V3, V4, V5)

Release CEC Firmware v1.200 for uBITX All Version (include v2, v3, v4, v5) I did the firmware work for v5 when uBITX V5 was released, but I release it now. I received the feedback from a thankful beta tester and tested it myself by converting my uBITX v3 to v5 but I was not sure. I ordered the uBITX V5 and delivered the correct uBITX V5, so I made a little more fine-tuning. If you use V2, V3, V4, you do not need to update this firmware.

Introducing UV-K5 Version 0.1P (CW)

  Introducing UV-K5 Version 0.1P (CW Mode) CW-related functions have been added to version 0.1P. The spectrum function has been removed but is maintained in the source code. Later, when the source code is distributed, you can activate it and use it if necessary. This version is for testing purposes only. It will be redistributed as the stable version 0.2 in approximately 1-2 weeks. If you don't want to beta test, you can wait a week or two and download 0.2