Skip to main content

DMR Talk group Status Server

 DMR Talk group Status Server

DVPi users do not need to install this server. You only need to enter the TG Status server address in DVPi 0.9.


brandmeister.network has stopped running hose servers anymore. so, I developed a service program to replace the hose server. It works on Raspberry Pi. 

I want to have several servers running to reduce the system and network load.

I have been building and testing this server for the past few weeks. The server is pretty stable, so you will rarely need to manage it.

You just need to copy and put the image on the Raspberry Pi.

id : pi, pwd : dvpi

If necessary, you can set a fixed ip on the Raspberry pi.


If you have extra RPI and can use public IP or domain (ex dynip), You will be able to run the server.

If you run a server, it will be convenient for many DVPi users.


Again, but you don't need to install this service to use DVPi.

This is for use only by anyone who wants to serve other DVPi users.


1.Download

Click the link below to download the image file.

TGS Status Server IMG


2.Install

After unzipping, you will find the following two files.

Write tgs_server_091.img to the sd card (using Windisk Image32 or rpi utils)


IP is automatically set by DHCP. You can find the IP using DVPi Manager.


3. Service Test
Tgstest.exe included in the compressed file is a program that can check whether the service works well.


After running tgstest.exe, enter the IP address of RPI (or domain address of RPI). 

Click the 'Get TG Status', then the DMR Last heard information received from your RPI is displayed.

If'Auto Get TG Status' is selected, DMR TG status information is continuously retrieved every 3 seconds.

This new service is available as of DVPi 0.9
Below is the screen running for 15 hours to test the DVPi stability.





4.conclusion

Again, you do not need to install this service for using DVPi.
I'm looking for someone who wants to run a service for other users. Please test this and send me an email if the service is available.

I chose this method to serve DVPi users without overloading the brandmeister.network server.  If the Last Heard service on brandmeister.network stops or changes, we may need to re rechange the service program.


Thanks for waiting for DVPi 0.9, 

Ian KD8CEC




Comments

  1. k5026b@gmail.com
    감사합니다.

    ReplyDelete
    Replies
    1. Thanks for your support
      My email address is kd8cec@gmail.com

      Delete
  2. Thanks,

    I installed DMR TG Status Server and setup Port Forward.
    It looks like working perfectly
    but DVPi didn't test it yet.

    Small suggestion,
    If you could provide us tgs_server.vdi file for Oracle Virtual MC,
    I think we can use and share it without a separate RaspberryPi.

    Thanks again,

    DS5QDR Lee, Heonmin!

    ReplyDelete
    Replies
    1. DS5QDR
      That's easy.
      If you want, we can also tell you how to install it.
      I will make it based on ubuntu soon. But I mainly use VMWare. Perhaps there is a change from VMWare to an oracle virtual machine.
      Can I make it a VMWare file?
      Ian KD8CEC

      Delete
  3. I want to run the service for other users, and I want to test this.
    Please send me the data via email.

    ReplyDelete
    Replies
    1. You can download and use the file linked in this article.
      There is no separate data.
      If you want to service, just run the service and tell me your IP or domain.
      Ian

      Delete
    2. I sent you the public IP via email. Thank you.

      Delete
    3. can i your email address or callsign?
      i received just 4 email about TG Status Server
      my email address : kd8cec@gmail.com
      thanks for your support

      Delete
  4. Hello?
    I am HL1RR/LIM.
    I am not sure what role DMR TALK GROUP STATUS SERVER plays.
    What are the roles and advantages of SERVER?
    Thank you for your connection configuration and detailed explanation.
    HL1RR/LIM 73! hopeseoul@gmail.com

    ReplyDelete
    Replies
    1. There is a 'DMR Talkg group Button' at the bottom of the DVPi program.

      Until a month ago, the button displayed the status of the Talk group,
      And by turning the encoder, we could check the people in the talk group.
      The service used a hose server (real name is hose) on the dmr network.

      By the way, the dmr network operation team stopped the hose server.
      So, DVPi could no longer check the status of other Talk groups.

      I made it possible for the'DMR Talk group status server' to do some of the services previously provided by the Hose server whose service was stopped.

      DVPi will be able to display the Talk group status using the'DMR Talk group status server' instead of the Hose server.
      Thanks for you interest

      Delete
    2. This comment has been removed by the author.

      Delete
    3. Thank you for your kind explanation.

      HL1RR/LIM 73! hopeseoul@gmail.com

      Delete
    4. This comment has been removed by the author.

      Delete
  5. Good morning Lan

    I saw the new update 0.91 and I didn't understand if we have to replace it with the previous version 0.88 ???

    We need to make a new Raspberry that acts as a server ???

    It is not possible to create a procedure that updates the program without having to create a new micro SD each time, I ask because in this way we do not have to disassemble everything by re-entering all the parameters, the Talk Group lists and the Reflector cables!

    Maurizio

    ReplyDelete
    Replies
    1. Maurizio.
      no. You only need to update the DVPi version as before. Another RPI is not required. Also, if you are using Version 0.88 and there is no problem, you do not need to update. Talk group list can be backed up using the'Save as' button.
      In Version 1.0, only the program will be updated.

      Ian KD8CEC



      Delete

  6. Hi Lan

    Updating the DVPi means reprogramming a new SD with the new img file as I have always done !!!
    I have a procedure to update only the part of the DVPì that I do not know?
    Ok for saving the data ... surely I save some time.

    Maurizio

    ReplyDelete
  7. Where is DVPI 0.9 ??? we are still on 0.88 ... I have not seen any update yet !!

    ReplyDelete
    Replies
    1. It will be distributed within a few days including the Talk group status server address.
      Ian KD8CEC

      Delete
  8. Hi Lan, are there any developments for bluethoot microphones?
    I would like to send you some pictures of my homemade dvpi.

    ReplyDelete
  9. This comment has been removed by the author.

    ReplyDelete
  10. thanks IAN thats what i understood but there were some confusing comments there jajaja. other thing is i notice that DSTAR i am from Australia and no matter what DSTAR REF channel i am in i dont hear anyone it looks as if is sitting IDLE not listening at all ???
    Is it my imagination or Ignorance??
    thanks Ian ,great job mate!!

    ReplyDelete
  11. From Smart Contract development to Cryptocurrencies and theBest Blockchain App Development Company in UAE, AjathInfotech’s expertise lies everywhere. Right from auditing the processes before they go live on the unaltered system and helping startups and enterprises raise an ICO, we have done it all.

    ReplyDelete
  12. It's just awesome. I will share this with my friends too.
    If you searching for authentic trending news articles
    Just click on:
    pakistan it companies
    advertising agencies
    company for digital marketing

    ReplyDelete
  13. Thanks for the information shared. Keep updating blogs regularly. If you have time visit
    false ceiling

    ReplyDelete
  14. Thanks for the information shared. Keep updating blogs regularly. If you have time visit best hotel in bakersfield

    ReplyDelete
  15. One popular Manali tour package includes a visit to Rohtang Pass, a majestic mountain pass located at 3,978 meters. This package often includes transportation, permits, and a guided tour of the past, allowing you to marvel at the stunning vistas of snow-capped peaks and indulge in thrilling snow activities.


    Read more : https://lockyourtrip.com/packages/manali/tour-packages/


    ReplyDelete
  16. I am a DVPi user that's why I cannot install it, now and I know. Thank you for this information. https://www.aaafencedeck.com

    ReplyDelete
  17. This site has become my go-to resource. It's filled with valuable information. https://www.sidingcoquitlambc.com

    ReplyDelete

Post a Comment

Popular posts from this blog

Introduction to UV-K5 HF Fullband receive version 0.3

Introduction to UV-K5 HF Fullband receive Version 0.3 This is an introduction to UV-K5 HF full-band reception firmware 0.3HF using SI4732-A10. This version is released separately from the existing UV-K5 CEC firmware version. because space is needed to store a large PATCH file to use SI4732-A10's SSB. 0.3HF added several functions to use SSB for shortwave radio and amateur radio.

Release CEC Firmware v1.200 for uBITX All version(include V2, V3, V4, V5)

Release CEC Firmware v1.200 for uBITX All Version (include v2, v3, v4, v5) I did the firmware work for v5 when uBITX V5 was released, but I release it now. I received the feedback from a thankful beta tester and tested it myself by converting my uBITX v3 to v5 but I was not sure. I ordered the uBITX V5 and delivered the correct uBITX V5, so I made a little more fine-tuning. If you use V2, V3, V4, you do not need to update this firmware.

Introducing UV-K5 Version 0.1P (CW)

  Introducing UV-K5 Version 0.1P (CW Mode) CW-related functions have been added to version 0.1P. The spectrum function has been removed but is maintained in the source code. Later, when the source code is distributed, you can activate it and use it if necessary. This version is for testing purposes only. It will be redistributed as the stable version 0.2 in approximately 1-2 weeks. If you don't want to beta test, you can wait a week or two and download 0.2