Skip to main content

Missing University Amateur Radio Club

I took a short break at lunch time and went to the school ham club, But I could not find them.
Room 528 in Student hall was an amateur radio club but now it has changed, and i can not find a ham club anywhere in university web pages.
In most universities, the ham club disappeared. It is probably our responsibility as an established generation.


Comments

Popular posts from this blog

How to upgrade uBITX Firmware

uBITX is based on Arduino Nano. So uBITX's firmware upgrade method is the same as Arduino.
There are two ways to upgrade the firmware of uBITX.

The first is to compile the source from the Arduino IDE, and the second is to upload the compiled hex file using the Firmware Upgrade Tool.

I'll show you how to upload a compiled hex file as a second method.

1.Connect the uBITX's USB cable to the computer.


2.Run Device Manager on your computer.
  The way to open the Device Manager for each OS Version differs slightly.
  In most Windows, you can easily launch the Device Manager by running.

  On your computer, press the Windows key + R.



 Type devmgmt.msc and press OK Button.




On most operating systems, there will be a serial port named Ports with CH340. If so, the next step is skipped.

If the serial port is not installed as below, you need to install the driver.



Included in uBITX is the Adonano, which uses the CH340 USB To UART part.

Download the latest CH340 driver from the Internet.

uBITX with Nextion LCD (CEC Firmware) - Installation and Introduction

uBITX with Nextion LCD (CEC Firmware) - Installation and Introduction uBITX CEC Firmware supports various LCD since Version 1.08 (16x02 Parallel, 20x04 Parallel, 16x02  I2C, 20x04 I2C, 16x02 Dual LCD with I2C).
Supports Nextion LCD (Graphic LCD) from Version 1.09, Version 1.09x is primarily aimed at Nextion LCD support. Also 1.09x will continue to be Beta version. If you want a stable version, please use 1.08 or 1.1 version to be released in the future.

uBITX Firmware CEC Version 1.08 Release

uBITX Firmware CEC Version 1.08 Release
Version 1.08 is the first major release since 1.061, I will release it after a 50-day beta test